2201 E. Willow St. #D-104, Signal Hill, CA 90806-2142
Phone: 562-597-4533, Fax: 562-498-2275
http://www.levelingmounts.com e-mail: glides@gte.net
These steel, delrin, and stainless leveling feet are used to level and stabilize cabinets and equipment. The heat-treated stud and ball swivels 15° from centerline. Available in gold iridite zinc or black oxide finish (use B instead of G). An optional elastomer pad (Add -P) or cork pad (add -K) provides minor isolation protection, a non-marring surface and improved footing (1/8" thick) [Reduce load rating by 25%]. Also available in metric!
Delrin is a registered trademark of Dupont Corporation.
NEW! Low Profile Swivel Levelers. Lower weight, cost and height. This design allows you to lower the center of gravity of your equipment (for OSHA) and has a special ball design which reduces ball and base separation. It also allows you to recess the casters into your equipment and not worry about the feet hitting when rolling over door sills and up ramps. Also available with an optional .59" diameter lag hole (Add -H) (1-7/8" diameter base and larger).
To order stainless, replace G with S in the P/N.
To order 4" thread length (add X4)
| Socket Type | Stud Type | LOAD | STEEL | INCHES | ||||
| P/N | P/N | RATING | ___A___ | __B___ | ___C___ | ___D___ | __G___ | H |
| IL61-6G | IL62-6G | 4000 lb | 3/8-16 | 5/8 | 1/2 | 1-1/4 | 3/16 | 3/16 |
| IL61-7G | IL62-7G | 5000 lb | 1/2-13 | 5/8 | 1/2 | 1-1/4 | 1/2 | 3/16 |
| IL61-8G | IL62-8G | 6000 lb | 5/8-11 | 7/8 | 1/2 | 1-1/4 | 1/2 | 3/16 |
| IL61-9G | IL62-9G | 7000 lb | 3/4-10 | 7/8 | 1/2 | 1-1/4 | 1/2 | 3/16 |
| IL63-6G | IL64-6G | 4000 lb | 3/8-16 | 5/8 | 1/2 | 1-7/8 | 3/16 | 3/16 |
| IL63-7G | IL64-7G | 5000 lb | 1/2-13 | 5/8 | 1/2 | 1-7/8 | 1/2 | 3/16 |
| IL63-8G | IL64-8G | 6000 lb | 5/8-11 | 7/8 | 1/2 | 1-7/8 | 1/2 | 3/16 |
| IL63-9G | IL64-9G | 7000 lb | 3/4-10 | 7/8 | 1/2 | 1-7/8 | 1/2 | 3/16 |
| IL65-6G | IL66-6G | 4000 lb | 3/8-16 | 5/8 | 1/2 | 2-1/2 | 3/16 | 3/16 |
| IL65-7G | IL66-7G | 5000 lb | 1/2-13 | 5/8 | 1/2 | 2-1/2 | 1/2 | 3/16 |
| IL65-8G | IL66-8G | 6000 lb | 5/8-11 | 7/8 | 1/2 | 2-1/2 | 1/2 | 3/16 |
| IL65-9G | IL66-9G | 7000 lb | 3/4-10 | 7/8 | 1/2 | 2-1/2 | 1/2 | 3/16 |
| IL67-6G | IL68-6G | 4000 lb | 3/8-16 | 5/8 | 1/2 | 3 | 3/16 | 3/16 |
| IL67-7G | IL68-7G | 5000 lb | 1/2-13 | 5/8 | 1/2 | 3 | 1/2 | 3/16 |
| IL67-8G | IL68-8G | 6000 lb | 5/8-11 | 7/8 | 1/2 | 3 | 1/2 | 3/16 |
| IL67-9G | IL68-9G | 7000 lb | 3/4-10 | 7/8 | 1/2 | 3 | 1/2 | 3/16 |
| IL69-6G | IL70-6G | 4000 lb | 3/8-16 | 5/8 | 1/2 | 4 | 3/16 | 3/16 |
| IL69-7G | IL70-7G | 5000 lb | 1/2-13 | 5/8 | 1/2 | 4 | 1/2 | 3/16 |
| IL69-8G | IL70-8G | 6000 lb | 5/8-11 | 7/8 | 1/2 | 4 | 1/2 | 3/16 |
| IL69-9G | IL70-9G | 7000 lb | 3/4-10 | 7/8 | 1/2 | 4 | 1/2 | 3/16 |
These LOW PROFILE steel and stainless steel (add S to end of P/N) rigid leveling feet are an economical solution for medium duty applications. The steel stud is clear zinc plated. Available with white or black delrin or polyethylene base.
NEW! Low Profile Polyethylene Based Levelers with a stainless steel stud are now available for the Semiconductor industry. Impervious to almost all acids, corrosives and cleaning agents. (Add -PE to P/N)
NEW! 2" and 3" diameter black, white, green or various other colored delrin bases. To order the 2" diameter base, IL7 becomes IL7A. To order the 3" diameter base, IL8 becomes IL8A.
NEW! 4" stud length (add x4) with optional slot at top (add -SLT).
NEW! 4" stud length (add x4) with optional slot at bottom (add -SLB).
To order both top & bottom slotted, (add -SL2).
NEW! A .28" Lag Hole is available in the 1-1/2" base size (add -H). NOTE: Only available with the 3/8-16 and 1/2-13 thread sizes (1/2" hex). The washer is removed, lowering the height by 1/16 inch.
NEW! Jam Nut option on all thread sizes (add -JN).
Receive a FREE sample of our exclusive Low Profile Delrin levelers. Simply e-mail your shipping address along with the P/N requested. E-mail - Click Here
| LOAD | STEEL | INCHES | |||||
| BLACK | WHITE | RATING | ___A___ | ___B___ | ___C___ | ___D___ | F |
| IL7-6B | IL7-6W | 800 lb | 3/8-16 | 1/2 | 11/16 | 1 | 1-9/16 |
| IL7-7B | IL7-7W | 800 lb | 1/2-13 | 1/2 | 11/16 | 1 | 1-9/16 |
| IL7-8B | IL7-8W | 1000 lb | 5/8-11 | 3/4 | 11/16 | 1 | 1-9/16 |
| IL7-9B | IL7-9W | 1000 lb | 3/4-10 | 3/4 | 11/16 | 1 | 1-9/16 |
| IL8-6B | IL8-6W | 1200 lb | 3/8-16 | 1/2 | 11/16 | 1-1/2 | 1-9/16 |
| IL8-7B | IL8-7W | 1200 lb | 1/2-13 | 1/2 | 11/16 | 1-1/2 | 1-9/16 |
| IL8-8B | IL8-8W | 1400 lb | 5/8-11 | 3/4 | 11/16 | 1-1/2 | 1-9/16 |
| IL8-9B | IL8-9W | 1400 lb | 3/4-10 | 3/4 | 11/16 | 1-1/2 | 1-9/16 |
| IL7A- | IL7A- | 1600 lb | 2 | ||||
| IL8A- | IL8A- | 1800 lb | 3 |
Newest non-cataloged "stock" items as of 7/28/99 (by thread size and length) -
M5 x 5 mm
M8 x 62 mm
M10 x 102 mm
M12 x 75 mm, x 102 mm
3/8-16 x 1-9/16", x 2", x 3", x 4"
1/2-13 x 1-9/16", x 1-3/4", x 3", x 3-1/2", x 4", x 5"
1/2-20 x 2", x 4"
5/8-11 x 1-9/16", x 4", x 6", x 8"
3/4-10 x 1-9/16", x 2-1/2", x 3", x 3-1/2", x 4-1/2", x 9"
Click here to request a free IEC Catalog... E-mail your shipping address.
Click here if you have an Urgent need for a free IEC Catalog... E-mail your shipping address.
Click here to request Price & Delivery.
Click here to request a phone call from an Applications Engineer.
Click here to request a Sample.
Revised: 2/8/05
Have a nice day. Thanks for visiting.
Copyright © 1996-2005